Threaded Mounting Pins with Securing Nuts for Reco-Traks

The Threaded Mounting Pins and Securing Nuts are designed to easily and securely mount your Reco-Traks recovery boards to your vehicle, trailer or caravan. The unique design will mount up to four Reco-Traks Off-Road Recover Boards while also supporting the use of a lock for extra protection.

Features:

M6 Threaded Base Design: With the M6 threaded base design, you’re able to secure these pins easily onto a variety of surfaces. Depending on your installation, mounting location, and brackets used you may require four pins for optimum security and stability. For vertical, side, or anything other than flat mounting, we highly recommend using two sets of Mounting Pins.

Pairs with Mounting Baseplate: When paired with a Mounting Baseplate*, the installation is more secure and easier to mount due to the pin location slots, recesses and covers within the Baseplate design. *Not included, sold separately.

Works With Other Branded Recovery Boards: These pins will also work on other branded recovery boards. To ensure fitment is possible check the stacking height measurement – The Threaded Mounting Pin has a securing height range of 18-73mm (0.7″ – 2.87″) while maintaining the locking feature.

What’s Included:

• 2 x Reco-Traks 115mm/4.5″ Threaded Mounting Pins
• 2 x Reco-Traks Securing Nuts
• 2 x Stainless Steel M6 Button Socket Head Cap Bolts
• 2 x Stainless Steel M6 Washers (12mm / 0.47″ O.D.)
• 2 x Stainless Steel M6 Washers (17mm / 0.67″ O.D.)
• 2 x Rubber Spacers (Grommets)

• M6 Washers Outside Diameter(2 of Each Size):12mm and 17mm
• Mounting Pin Length: 115mm